Cause | Action | ||||||||
|---|---|---|---|---|---|---|---|---|---|
The brake transmission shift interlock (BTSI) system is damaged. | Repair or replace the BTSI as needed. Refer to BTSI - Disassemble or BTSI - Assemble. | ||||||||
The lock cylinder housing assembly is damaged. | Replace the lock cylinder housing. Refer to Ignition Lock Cylinder Replacement - On Vehicle . | ||||||||
The shaft assembly is damaged. | Replace the shaft assembly. Refer to the appropriate procedure from the following list:
| ||||||||
The ignition switch assembly is damaged. | Replace the ignition switch assembly. Refer to Ignition and Key Alarm Sw Assembly - Assemble or Ignition and Key Alarm Sw Assembly - Assemble Floor Shift . | ||||||||
The shaft linkage adjustment is improper. | Adjust the shaft linkage adjustment. Refer to Shift Cable Adjustment or Shift Cable Adjustment . | ||||||||
The rack preload spring is broken or weak. | Replace the rack preload spring. | ||||||||
The park lock cable is not adjusted properly. | Adjust the park lock cable. Refer to the appropriate procedure in Park Brake from the following list: | ||||||||
The key is incorrect, bent, or twisted. | Replace the key. Refer to Key and Lock Cylinder Coding in General Information. | ||||||||
The rack is bent or broken. | Replace the rack. |
