Circuit Description
When the engine oil level is in the normal range, the engine oil level switch is a closed switch and the engine oil level switch signal is low.
When a low engine oil level condition is present, the engine oil level switch is an open switch and the engine oil level switch signal is high. The IPC receives a class 2 message from the PCM requesting illumination of the CHECK ENG OIL LEVEL indicator.
Step | Action | Value(s) | Yes | No | ||||
|---|---|---|---|---|---|---|---|---|
Schematic Reference: Instrument Cluster Schematics | ||||||||
1 | Did you perform the Instrument Cluster Diagnostic System Check? | -- | Go to Step 2 | |||||
2 | Turn the ignition ON, with the engine OFF. Does the CHECK ENGINE OIL LEVEL indicator display in the message center? | -- | Go to Step 3 | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | ||||
3 |
Does the Engine Oil Level Switch parameter display OK? | -- | Go to Step 9 | Go to Step 4 | ||||
4 |
Does the Engine Oil Level Switch parameter display LOW? | -- | Go to Step 5 | Go to Step 6 | ||||
5 | Test the signal circuit of the engine oil level switch for an open or for a high resistance. Refer to Circuit Testing and to Wiring Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 12 | Go to Step 8 | ||||
6 | Test the ground circuit of the engine oil level switch for an open or for a high resistance. Refer to Circuit Testing and to Wiring Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 12 | Go to Step 7 | ||||
7 | Inspect for poor connections at the harness connector of the engine oil level switch. Refer to Testing for Intermittent Conditions and Poor Connections and to Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 12 | Go to Step 10 | ||||
8 | Inspect for poor connections at the harness connector of the PCM. Refer to Testing for Intermittent Conditions and Poor Connections and to Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 12 | Go to Step 11 | ||||
9 | Replace the IPC. Refer to Instrument Cluster Replacement . Did you complete the replacement? | -- | Go to Step 12 | -- | ||||
10 | Replace the engine oil level switch. Refer to :
Did you complete the replacement? | -- | Go to Step 12 | -- | ||||
11 |
Important: Program the replacement PCM. Replace the PCM. Refer to:
Did you complete the replacement? | -- | Go to Step 12 | -- | ||||
12 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 3 | ||||
