Removal Procedure
- Remove the fuel tank.
Refer to
Fuel Tank Replacement
.
- Remove the rear evaporative emission (EVAP) pipe (1) from the
sending unit (2), the fuel tank roll over valve (3) and fuel tank clips (6).
- Cap the sending unit EVAP pipe and fuel tank roll over valve.
Installation Procedure
- Remove the caps from the
sending unit EVAP pipe and fuel tank roll over valve.
- Connect the rear EVAP pipe (1) to the sending unit (2), fuel tank
roll over valve (3), and fuel tank clips (6).
- Install the fuel tank. Refer to
Fuel Tank Replacement
.