Important: Clean all evaporative emission (EVAP) tube connections and surrounding areas before disconnection in order to avoid possible EVAP system contamination.

1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
2. Disconnect the rear EVAP purge tube from the chassis EVAP purge pipe.
3. Disconnect the rear EVAP purge tube from the EVAP canister.
4. Cap the chassis EVAP purge pipe and the EVAP canister in order to prevent possible EVAP system contamination.

1. Remove the caps from the chassis EVAP purge pipe and the EVAP canister.
2. Connect the rear EVAP purge tube to the EVAP canister.
3. Connect the rear EVAP purge tube to the chassis EVAP purge pipe.
4. Lower the vehicle.