Special Tools

J 33037 2-4 Intermediate Band Apply Pin Gage

1. Disassemble the 2-4 servo assembly. If necessary, refer to 2-4 Band Servo 2nd Apply Piston Disassemble.



2. Install the band apply pin (13) and the J 33037 pin gage  (1).
3. Install the servo cover retaining ring (29) to secure the tool.



4. Apply 11 N·m (98 lb in) torque. If the white line appears in the gage slot (1), the pin length is correct.
5. If a new pin is needed, refer to 2-4 Band Servo Piston Pin Selection in order to determine correct pin length.