CAMPAIGN: SUPPLEMENT POWER STEERING HOSE ROUTING

THE FOLLOWING INFORMATION IS A SUPPLEMENT TO THE PARTS INFORMATION SECTION LOCATED ON PAGE 5 AND THE ILLUSTRATION LABELED VIEW A ON PAGE 6 OF YOUR CAMPAIGN BULLETIN 81C04 ISSUED OCTOBER, 1980.

PARTS INFORMATION

PART NUMBER 22501281 INLET PIPE SHOULD BE PART NUMBER 14036321.

ILLUSTRATION

VIEW A SHOWN ON PAGE 5 SHOULD SHOW THE PRESSURE HOSE ASSEMBLY ROUTED BEHIND THE TWO CYLINDER LINES ON THE HOUSING ASSEMBLY AS SHOWN ON VIEW A FURNISHED AS PART OF THIS SUPPLEMENT.(SEE REVERSE SIDE).

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.