GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Classic 🢒 Engine 🢒 Engine Controls - 2.2L (L61) 🢒 Front Fender Liner Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  3. Remove the screws from the mud flap, if equipped.
  4. Remove the mud flap from the fender, if equipped.

    5. Object Number: 330141 Size: SH
  5. Remove the front fender liner to front bumper fascia bolts.
  6. Remove the push-in retainers from the front fender liner.

    7. Object Number: 276965 Size: SH
  7. Remove the front fender liner to front fender bolts (4).
  8. Remove the front fender liner from the front fender.

Installation Procedure

    Object Number: 276965 Size: SH
  1. Position the front fender liner to the front fender.
  2. Install the push-in retainers to the front fender liner.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the front fender liner to front fender bolts (4).

    4. Tighten
    Tighten the bolts to 2 N·m (18 lb in).


    Object Number: 330141 Size: SH
  4. Install the front fender liner to front bumper fascia bolts.

    5. Tighten
    Tighten the bolts to 2 N·m (18 lb in).

  5. Position the mud flap to the front fender, if equipped.
  6. Install the front mud flap screws.

    7. Tighten
    Tighten the screws to 2 N·m (18 lb in).

  7. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  8. Lower the vehicle.