Voltage is applied at all times through the TRUNK REL/RFA fuse to the rear compartment lid release switch and the switch side of the rear compartment lid release relay. When the release switch is pressed, the following actions occur:
| • | The switch closes. |
| • | Voltage is applied to the coil side of the rear compartment lid release relay. |
When the transaxle is in PARK or NEUTRAL, the rear compartment lid release relay is grounded through the transaxle range switch. With the coil side of the relay energized, the relay contacts close, applying voltage to the rear compartment lid release motor.
If the vehicle is equipped with remote entry, the switch operation is the same, except when the contacts in the rear compartment lid release relay close, voltage is applied through the normally closed contacts of the remote control door lock receiver. This action occurs in order to apply voltage to the rear compartment lid release motor.
