For 1990-2009 cars only
Removal Procedure
- Remove the front door outer belt sealing strip screw (1) from the front door outer belt sealing strip (2).
- Pull up on the rear of the front door outer belt sealing strip in order to release the strip from the retaining clips.
- Slide the front door outer belt sealing strip (2) rearward to remove it from under the mirror.
- Remove the front door outer belt sealing strip from the door.
Installation Procedure
- Position the front door outer belt sealing strip (2) to the door.
- Slide the front of the sealing strip under the mirror.
- Align the front door outer belt sealing strip clips to the slots in the door. Push down until an audible snap is heard at each retaining clip in order to engage the front door outer sealing strip (2) to the front door.
- Install the front door outer belt sealing strip screw (1) to the front door outer belt sealing strip (2).
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the front door outer belt sealing strip screw to 1 N·m
(9 lb in).
