For 1990-2009 cars only
Removal Procedure
- Use a flat bladed tool in order to remove the power window switch (3) from the door trim panel. Push in and lift up at the side of the switch.
- Disconnect the electrical connector (2) from the power window switch (3).
- Remove the power window switch bezel (1) from the power window switch (3) by releasing the retainers with the flat bladed tool.
Installation Procedure
- Install the bezel (1) to the power window switch (3) by pressing it into the retainers until fully seated.
- Connect the electrical connector (2) to the power window switch (3).
- Install the power window switch (3) to the door trim panel by pressing it until fully seated.
