GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Classic 🢒 Body 🢒 Exterior Trim 🢒 Grille Replacement

Removal Procedure
  1. Open the hood.

    2. Object Number: 277183 Size: SH
  2. Remove the push-in retainers (1) from the upper edge of the grille.
  3. Disconnect the grille (3) from the front bumper fascia (2).

    4. Object Number: 747927 Size: SH
  4. Remove the nuts from the grille emblem.
  5. Remove the grille emblem from the grille.

Installation Procedure

    Object Number: 747927 Size: SH
  1. Position the grille emblem to the grille.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the grille emblem nuts to the grille emblem.

    3. Tighten
    Tighten the nuts to 1 N·m (9 lb in).


    Object Number: 277183 Size: SH
  3. Install the grille (3) to the front bumper fascia (2).
  4. Install the push-in retainers (1) along the upper edge of the grille.
  5. Close the hood.