GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Classic 🢒 Accessories 🢒 Entertainment 🢒 Radio Rear Speaker Replacement

Removal Procedure

    Object Number: 443654 Size: SH
  1. Remove the rear window trim panel. Refer to Rear Window Shelf Trim Panel Replacement in Interior trim.
  2. Remove the rear speaker screws (1) from the speaker (3).
  3. Remove the speaker (3) from the rear package self.
  4. Disconnect the electrical connector (2) from the speaker (3).

Installation Procedure

    Object Number: 443654 Size: SH
  1. Connect the electrical connector (2) to the speaker (3).
  2. Install the speaker (3) to the package self.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the speaker screws to the rear speaker.

    4. Tighten
    Tighten the screws to 1.5 N·m (13 lb in).

  4. Install the rear window trim shelf. Refer to Rear Window Shelf Trim Panel Replacement in Interior trim.