Important: The following steps must be completed before
using the symptom tables.
- Perform
Diagnostic System Check - Vehicle
in Vehicle DTC Information before using the Symptom Tables in order
to verify that all of the following are true:
• | The control modules can communicate via the serial data link. |
- Review the system operation in order to familiarize yourself with the
system functions. Refer to the following:
Visual/Physical Inspection
• | Inspect the easily accessible or visible system components for obvious
damage or conditions which could cause the symptom. |
Intermittent
Faulty electrical connections or wiring may be the cause of intermittent conditions.
Refer to
Testing for Intermittent Conditions and Poor Connections
in Wiring Systems.
Symptom List
Refer to a symptom diagnostic procedure from the following list in order to
diagnose the symptom:
• | The Vehicle will not start, No DTCs are set, SECURITY indicator is ON.
Refer to
DTC B2958 |