GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement in Seats.

  2. Object Number: 600997  Size: SH
  3. Remove the rear seat belt buckle anchor nut.
  4. Remove the rear seat belt buckle assembly from the vehicle.

Installation Procedure


    Object Number: 600997  Size: SH
  1. Install the rear seat belt buckle assembly to the vehicle.
  2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the rear seat belt buckle anchor nut.
  4. Tighten
    Tighten the nut to 50 N·m (37 lb ft).

  5. Install the rear seat cushion. Refer to Rear Seat Cushion Replacement in Seats.