GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2006 🢒 Classic 🢒 Body 🢒 Stationary Windows 🢒 Inside Rearview Mirror Replacement

Removal Procedure
  1. Loosen the screw in the center of the rearview mirror support.
  2. Disconnect the electrical connector, if equipped.

    3. Object Number: 319020 Size: SH
  3. Slide the rearview mirror from the rearview mirror support.
  4. Remove the lens and reading lamp bulbs, if equipped.

Installation Procedure
  1. Install the reading lamp bulb to the sockets, and lens, if equipped.

    2. Object Number: 319020 Size: SH
  2. Install the rearview mirror to the rearview mirror support, ensuring that the mirror is fully seated.
  3. Connect the electrical connector, if equipped.

    4. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  4. Tighten the rearview mirror support screw.

    5. Tighten
    Tighten the screw to 2 N·m (18 lb in).