For 1990-2009 cars only
Removal Procedure
- Remove the console. Refer to Console Replacement in Instrument Panel, Gages, and Console.
- Remove the right side insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Right Side in Instrument Panel, Gages, and Console.
- Remove the left side insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side in Instrument Panel, Gages, and Console.
- Remove the bolts holding the floor air duct to the HVAC module assembly.
- Release the wire harness retainers from the floor air outlet duct.
- Remove the floor air outlet duct from the rear seat heat duct.
Installation Procedure
- Install the floor air duct to the rear seat air duct.
- Install the floor air duct to the HVAC module assembly.
- Secure the wire harness retainers to the floor air duct.
- Install the floor air outlet duct bolts.
- Install the left side insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side in Instrument Panel, Gages, and Console.
- Install the right side insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Right Side in Instrument Panel, Gages, and Console.
- Install the console. Refer to Console Replacement in Instrument Panel, Gages, and Console.
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the bolts to 2 N·m (18 lb in).
