GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Cobalt 🢒 Engine 🢒 Engine Mechanical - 2.0L 🢒 Oil Level Indicator Tube Replacement

Removal Procedure

    Object Number: 1339176 Size: SH
  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Unclip the electrical wiring harness from the oil level indicator tube.
  3. Lower the vehicle.
  4. Remove the oil level indicator tube bolt and unclip the upper wiring harness.
  5. Remove the oil level indicator tube.
  6. Remove the oil level indicator tube seal.

Installation Procedure

    Object Number: 1339176 Size: SH
  1. Install the oil level indicator tube seal.
  2. Install the oil level indicator tube.
  3. Clip the upper electrical wiring harness to the oil level indicator tube.

    4. Notice: Refer to Fastener Notice in the Preface section.

  4. Install the oil level indicator tube bolt.

    5. Tighten
    Tighten the oil level indicator tube bolt to 10 N·m (89 lb in).

  5. Raise the vehicle.
  6. Clip the lower wiring harness.
  7. Lower the vehicle.