Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Ignition ON/Engine OFF | |||
Battery Voltage Signal | BCM/Power Mode | Volts | 12.6 Volts |
Idle Boost Level | BCM/Power Mode | Amps | 0 Amps |
Run/Crank Relay | BCM/Power Mode | Active/Inactive | Inactive |
Run/Crank Relay Command | BCM/Power Mode | On/Off | On |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Ignition ON/Engine OFF | |||
Crank Request Signal | Engine Electrical, PCM | Yes/No | No |
GEN F-Terminal Signal | Engine Electrical, PCM | % | 0% |
GEN L-Terminal Signal | Engine Electrical, PCM | No Voltage, Voltage | Voltage |
Ignition 1 Signal | Engine Electrical, PCM | Volts | 12.6 V |
Ignition Accessory Signal | Engine Electrical, PCM | On/Off | On |
Starter Relay Command | Engine Electrical, PCM | On/Off | Off |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Ignition ON/Engine OFF | |||
Crank Request Signal | Engine Electrical, ECM | Yes/No | No |
GEN F-Terminal Signal | Engine Electrical, ECM | % | 0 % |
Ignition 1 Signal | Engine Electrical, ECM | Volts | 12.6 Volts |
Ignition Accessory Signal | Engine Electrical, ECM | On/Off | On |
Starter Relay Command | Engine Electrical, ECM | On/Off | Off |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Ignition ON/Engine OFF | |||
TR Sw. | Engine Data 2 | Park, Reverse, Neutral, Drive 5, Drive 4, Drive 3, Drive 2, Drive 1 | Park |
