GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Cobalt 🢒 Suspension 🢒 Front Suspension 🢒 Stabilizer Shaft Insulator Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the front wheels. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.

    3. Object Number: 851715 Size: SH
  3. Remove the stabilizer shaft mounting clamp bolts and clamps from both sides of the vehicle.

    4. Object Number: 851718 Size: SH
  4. Remove the bushings from the stabilizer shaft.

Installation Procedure

    Object Number: 851718 Size: SH
  1. Install the stabilizer bushings on the stabilizer shaft with the cut line facing rearward.

    2. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 851715 Size: SH
  2. Install the stabilizer shaft clamps and bolts.

    3. Tighten
    Tighten the bolts to 50 N·m (37 lb ft).

  3. Install the front wheels. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  4. Lower the vehicle.