Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

1. Remove the interior trim panel. Refer to Rear Side Door Trim Panel Replacement .
2. Remove the water deflector. Refer to Rear Side Door Water Deflector Replacement .
3. Move the window to the full up position and secure in place with tape.

1

Bolt, Side Door Window Regulator (Qty: 4)

Tip
Loosen the bolts enough so that the regulator assembly will lift out of the t-slots in the door inner panel.

Tighten
10 N·m (89 lb in)

2

Regulator Assembly, Rear Side Door Window

3

Motor, Rear Side Door Window Regulator

Tip
Disconnect the electrical connector.