Body Side Molding Replacement. Chevrolet Cobalt 2005

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2005 🢒 Cobalt 🢒 Body 🢒 Exterior Trim 🢒 Body Side Molding Replacement

Body Side Molding Replacement Two Door

Callout

Component Name

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Molding, Body Side (Door)

Tip

•	The body side door molding is attached using double sided tape. Use J 25070 Heat Gun or equivalent to aid in removal.

•	If the molding is missing, take dimensions from the other side of the vehicle for proper location.

Molding, Body Side - Quarter Panel

Tip

•	The body side quarter panel molding is attached using double sided tape. Use J 25070 Heat Gun or equivalent to aid in removal.

•	If the molding is missing, take dimensions from the other side of the vehicle for proper location.

Callout

Component Name

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Molding, Body Side - Front Door

Tip

•	The body side front door molding is attached using double sided tape. Use J 25070 Heat Gun or equivalent to aid in removal.

•	If the molding is missing, take dimensions from the other side of the vehicle for proper location.

Molding, Body Side - Rear Door

Tip

•	The body side rear door molding is attached using double sided tape. Use J 25070 Heat Gun or equivalent to aid in removal.

•	If the molding is missing, take dimensions from the other side of the vehicle for proper location.