For 1990-2009 cars only
Removal Procedure
- Cycle the sunroof window to the partially open position.
- Pull downward on the sunshade. Cycle the sunroof to full open position. Disengage the sunshade from the sunroof glass panel.
- Depress the panel to one side of the track assembly (1).
- With a flat-bladed tool, release the front retention clip (3), one of 2 clips located on each side of the sunshade panel.
- Carefully arch the sunshade upward at the forward center edge.
- Carefully lift the front edge of the sunshade (4) upward out of the opening.
- With the sunshade panel depressed to one side of the track, release the rear retention clip.
- Slightly rotate the sunshade panel in order to remove the panel from the track assembly.
- Carefully remove the sunshade panel upward from the sunroof module.
Installation Procedure
- Position rear edge of the sunshade panel to the track assembly.
- Ensure the retention clip at the rear is positioned into the track assembly.
- Depress the rear retention clip on the opposite side of the sunshade panel and locate the clip into the track assembly.
- Release the retention clip.
- Locate the front edge of the sunshade panel retention clip (2) into the track assembly (1).
- Arch the forward edge of the sunshade in order to locate the retention clip into the sunshade track.
- Depress the retention clip on the opposite side.
- Locate the clip into the track assembly and release.
- Slide the sunshade panel forward and rearward to ensure free operation is present.
- With the sunshade partially open, pull downward on the sunshade. Cycle the sunroof to the vent position, allowing the glass panel to travel past the sunshade front edge.
- Release the sunshade. Cycle the sunroof to the open position. Inspect for proper engagement of the sunroof glass panel and the sunshade panel.
