Caution: Refer to SIR Inflator Module Handling and Storage Caution in the Preface section.

Caution: Refer to SIR Caution in the Preface section.

Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

Disable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling .

1

Plate, Instrument Panel Trim

2

Compartment Assembly, Instrument Panel

Tip
Squeeze the inner compartment sides together in order to lower the door past the down stops.

3

Cover, Instrument Panel Compartment Accessory Hole

4

Bolt, Instrument Panel Inflatable Restraint Module (Qty: 2)

Tighten
10 N·m (89 lb in)

5

Module, Instrument Panel Inflatable Restraint

Tip

1. Remove the connector position assurance (CPA) retainer.
2. Disconnect the electrical connector.
3. Fully deploy the module before disposal. If the module was replaced under warranty, fully deploy and dispose of the module after the required period. Refer to Inflator Module Handling and Scrapping .