Removal Procedure
- Remove the front floor console storage compartment. Refer to
Console Front Trim Plate Replacement
in Instrument Panel, Gages, and Console.
- With park brake lever in the released position, using ONLY HAND TOOLS, remove
the park brake cable adjusting nut and washer.
- Release the rear park brake cable ends from the cable equalizer on the
front cable.
- Remove the front park brake cable from the park brake lever by pulling
the cable rearward.
Installation Procedure
- Install the front park brake cable to the park brake lever.
- Install the rear cable ends to the cable equalizer.
- Using ONLY HAND TOOLS, install the washer and NEW adjusting nut (1) to
the front park brake cable.
- Adjust the park brake cable tension. Refer to
Park Brake Adjustment
.
- Install the front floor console storage compartment. Refer to
Console Front Trim Plate Replacement
in Instrument Panel, Gages, and Console.