GM Service Manual Online
For 1990-2009 cars only

Object Number: 1641305  Size: MF

Callout

Component Name

Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Important: Provide support for the brake pressure modulator valve (BPMV) assembly while removing the BPMV bracket.

Preliminary Procedure

If equipped with RPO LSJ, remove the throttle body air snorkel.

1

Bolt, Brake Pressure Modulator Valve Bracket

Tip
Loosen upper bolt but do not remove.

Tighten
25 N·m (18 lb ft)

2

Bolt, Engine Control Module Bracket (Qty: 2)

Tighten
12 N·m (106 lb in)

3

Bolt, Brake Pressure Modulator Valve-to-Bracket

Tighten
5.6 N·m (50 lb in)

4

Insulator, Brake Pressure Modulator Valve

Tip
Inspect both the upper and lower insulators for excessive wear and/or damage. Replace the insulators if necessary.

5

Bracket, Brake Pressure Modulator Valve

Tip
The bracket upper mounting hole is a key hole slot design. Lift the bracket slightly to release it from the remaining bolt.