Clutch Pressure Plate Adjustment with LSJ
- Place the clutch pressure plate, flat surface down,
on a press.
- Compress the pressure plate diaphragm spring fingers until tension is
released from the stepped adjusting ring.
- Hold 2 screwdrivers, or other suitable tools, and place them against
2 of the 3 stepped adjusting ring tension spring stops (1), just
ahead of the adjusting ring tension springs.
- Using the screwdrivers, rotate the stepped adjusting
ring counterclockwise, compressing the tension springs, until the adjusting ring steps
are fully adjusted out, then continue to hold in position.
- Release the press pressure from the pressure plate diaphragm spring fingers.
- Release the adjusting ring tension spring stops.
- Remove the pressure plate from the press.