Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications.

Preliminary Procedure

Disable the SIR in Zones 2 or 6. Refer to SIR Disabling and Enablingor SIR Disabling and Enabling.

1

Bolt, Seat Belt Anchor

Tip
Move the seat to the full forward position to gain access to the bolt.

Tighten
45 N·m (33 lb ft)

2

Cover, Seat Belt Adjuster

3

Bolt, Seat Belt Adjuster

Tighten
45 N·m (33 lb ft)

4

Bolt, Seat Belt Retractor

Tip
Remove the center pillar lower garnish molding to gain access to the bolt. Refer to Center Pillar Lower Garnish Molding Replacement.

Tighten
45 N·m (33 lb ft)

5

Retractor Assembly, Front Seat Belt