SMU - Addition of Supercharger Boost Air Pressure Indicator Replacement Procedure. Chevrolet Cobalt 2005

Subject:

Addition of Supercharger Boost Air Pressure Indicator Replacement Procedure

Models:

2005 Chevrolet Cobalt

This bulletin is being issued to add the Supercharger Boost Air Pressure Indicator Replacement procedure in the Instrument Panel, Gages, and Console sub-section of the Service Manual. Please replace the current information in the Service Manual with the following information.

The following information has been updated within SI. If you are using a paper version of this Service Manual, please make a reference to this bulletin on the affected page.

Supercharger Boost Air Pressure Indicator Replacement

Callout	Component Name
Fastener Tightening Specifications: Refer to Fastener Tightening Specifications
Front Floor Console Reinforcement Replacement
1	Windshield Pillar Garnish Molding Refer to Windshield Garnish Molding Replacement.
2	Clip (Qty: 2) Tip Pinch together each of the clips to release the gauge from the windshield pillar.
3	Supercharger Boost Air Pressure Indicator Assembly Tip Disconnect the electrical connector.