SMU - Revised Trim Panel Replacement - Instrument Panel (I/P) Cluster. Chevrolet Cobalt 2005

Subject:

Revised Trim Panel Replacement - Instrument Panel (I/P) Center

Models:

2005-2006 Chevrolet Cobalt

2005-2006 Pontiac Pursuit (Canada Only)

This bulletin is being issued to revise the Trim Panel Replacement - Instrument Panel (I/P) Center procedure in the Instrument Panel, Gauges and Console sub-section of the Service Manual. Please replace the current information in the Service Manual with the following information.

The following information has been updated within SI. If you are using a paper version of this Service Manual, please make a reference to this bulletin on the affected page.

Trim Panel Replacement - Instrument Panel (I/P) Center

Callout	Component Name
Fastener Tightening Specifications: Refer to Fastener Tightening Specifications. Preliminary Procedure Remove the right I/P trim panel. Refer to Instrument Panel (I/P) Trim Panel Replacement - Right. Remove the driver information center (DIC) switch. Refer to Driver Information Center Switch Replacement.
1	Instrument Panel Trim Plate Assembly Tip Pull out on the trim panel in order to release the retaining fasteners. Disconnect the electrical connectors.
2	Instrument Panel Trim Plate Clip

Callout

Component Name

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications.

Preliminary Procedure

Remove the right I/P trim panel. Refer to Instrument Panel (I/P) Trim Panel Replacement - Right.
Remove the driver information center (DIC) switch. Refer to Driver Information Center Switch Replacement.

Instrument Panel Trim Plate Assembly

Tip

Pull out on the trim panel in order to release the retaining fasteners.
Disconnect the electrical connectors.

Instrument Panel Trim Plate Clip