GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Cobalt 🢒 Bulletins 🢒 SMU - Revised Seat Adjuster Replacement - Front

SMU - Revised Seat Adjuster Replacement - Front

Subject:Revised Seat Adjuster Replacement -- Front

Models:2005-2006 Chevrolet Cobalt
2005-2006 Pontiac Pursuit (Canada Only)


This bulletin is being issued to revise the Seat Adjustment Replacement - Front procedure in the Seats sub-section of the Service Manual. Please replace the current information in the Service Manual with the following information.

The following information has been updated within SI. If you are using a paper version of this Service Manual, please make a reference to this bulletin on the affected page.

Seat Adjuster Replacement - Front
Object Number: 1551201 Size: LF

Callout

Component Name

Notice: Refer to Fastener Notice in Cautions and Notices.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications.

Preliminary Procedures

  1. Remove the front seat. Refer to Seat Replacement - Front Bucket.
  2. Remove the cushion frame. Refer to Seat Cushion Frame Replacement - Front.
  3. Unhook the lower attachments of the seat back cover and raise the cover enough to expose the recliner springs. Refer to Seat Back Cover and Pad Replacement - Front.
  4. Align both recliner springs so that tension is held by the notch on the seat back frame. Ensure that the springs are completely seated in the notches before removing the adjuster support.

1

Seat Back Frame Nuts (Qty: 6)

Tip
Remove the bolt in the adjuster support to separate the adjuster sides.

Tighten
20 N·m (14 lb ft)

2

Front Seat Adjuster Assembly