Alternate Anti-Sway Bar Clamp Service Procedure

This is to inform dealers of an optional service procedure for front sway bar mounting clamps that is only to be performed at the owner's expense. This procedure requires the removal of the existing engine cradle and sway bar mounting clamps. These parts should be replaced with the parts listed in the table under Parts Information.

The following service replacement instructions can be found in SI. Remove the vehicle frame and replace with the part number listed below. Install the new anti-sway bar clamps.

The above modifications are considered to be a customer option and should be performed at the customer's expense.

Important: Should your vehicle be used for racing or other competitive driving, refer to your vehicle warranty book or your General Motors dealership for information on the General Motors New Vehicle Limited Warranty and how racing and competitive driving may affect your warranty.