GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2007 🢒 Cobalt 🢒 Engine 🢒 Engine Controls and Fuel - 2.2L (L61) 🢒 Manifold Absolute Pressure Sensor Replacement

Removal Procedure

    Object Number: 1581050 Size: SH
  1. Remove the throttle body. Refer to Throttle Body Assembly Replacement .
  2. Disconnect the engine harness electrical connector from the manifold absolute pressure (MAP) sensor.
  3. Remove the MAP sensor and seal.

Installation Procedure

    Object Number: 1581050 Size: SH
  1. Lubricate the NEW MAP sensor seal with clean engine oil.
  2. Install the MAP sensor into the intake manifold.
  3. Connect the engine harness electrical connector to the MAP sensor.
  4. Install the throttle body. Refer to Throttle Body Assembly Replacement .