GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2007 🢒 Cobalt 🢒 Body Systems 🢒 Wipers and Washers 🢒 Windshield Washer Hose Replacement

Removal Procedure
  1. Open the hood.
  2. Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement .

    3. Object Number: 1655548 Size: SH
  3. Disconnect the washer hose (1) from the washer container hose (3) at the fender flange.

    4. Object Number: 1655549 Size: SH
  4. Disconnect the washer hose (1) from the air inlet grille panel plenum.
  5. Disconnect the washer hose from the windshield washer nozzles.
  6. Disconnect the fender flange clip (3) from the fender flange.
  7. Pull the washer hose pump end out alongside the right front inner fender and into the engine compartment.
  8. Remove the washer hose from the vehicle.

Installation Procedure

    Object Number: 1655549 Size: SH
  1. Position the washer hose to the vehicle.
  2. Secure the washer hose (1) to the air inlet grille panel at four locations.
  3. Secure the washer hose to the windshield washer nozzles.
  4. Route the washer hose down alongside the right front inner fender flange.
  5. Connect the washer hose fender flange clips (3) to the fender flange.

    6. Object Number: 1655548 Size: SH
  6. Connect the washer hose (1) to the washer pump hose (3) and secure the fender flange clip (2).
  7. Install the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement .
  8. Close the hood.