Engine Flywheel Replacement for Chevrolet Cobalt 2007

1. Remove the transmission. Refer to Transmission Replacement .



2. Remove the flywheel bolts, and note the position of the flywheel to the crank shaft.
3. Remove the flywheel.

1. Position the flywheel on the crankshaft as previously noted.

Notice: Refer to Fastener Notice in the Preface section.

2. Install the flywheel bolts.

Tighten
Tighten the flywheel bolts to 53 N·m (39 lb ft) plus 25 degrees.

3. Install the transmission. Refer to Transmission Replacement .