Removal Procedure
- Loosen the outlet duct clamp at the air cleaner assembly.
- Remove the push pin (1).
- Remove the air cleaner mounting nuts (2).
- Remove the air cleaner.
Installation Procedure
Important: Verify full engagement of the inlet onto the resonator neck.
- Position the air cleaner assembly.
Notice: Refer to Fastener Notice in the Preface section.
- Install the air cleaner assembly attachment nut (2).
Tighten
Tighten the nut to 10 N·m (89 lb in).
- Install the push pin (1).
- Connect the air cleaner resonator to the air cleaner assembly.
Tighten
Tighten the air cleaner intake duct clamp to 5 N·m (44 lb in).