Notice: Refer to Fastener Notice in the Preface section.
- Install the intake manifold studs in the manifold face.
Tighten
Tighten the intake manifold studs to 6 N·m (53 lb in).
- Install a new intake manifold gasket on the intake manifold.
- Install the intake manifold.
- Install the intake manifold bolts and nuts. Follow the tightening sequence.
Tighten
Tighten the bolts and nuts to 10 N·m (89 lb in).
- Lubricate NEW fuel injector tip insulators
with engine oil.
- Install NEW fuel injector tip insulators.
- Lubricate the fuel injector oil rings with engine oil.
- Install the fuel rail assembly.
- Install the fuel rail stud.
Tighten
Tighten the stud to 10 N·m (89 lb in).
- Install a new throttle body gasket.
- Install the throttle body.
- Install the throttle body bolts.
Tighten
Tighten the bolts to 10 N·m (89 lb in).
- Install the EVAP canister valve (2).
Tighten
Tighten the EVAP canister valve to 22 N·m (16 lb ft).
- Install the EVAP canister valve tube (1).