Preliminary Procedure

Remove the fuel feed intermediate pipe. Refer to Fuel Feed Intermediate Pipe Replacement .

1

Camshaft Position Sensor Bolt

Notice: Refer to Fastener Notice in the Preface section.

Tighten
10 N·m (89 lb in)

2

Camshaft Position Sensor O-ring

Procedure

Lubricate the camshaft position sensor O-ring seal with clean engine oil.

3

Camshaft Position Sensor

Procedure

1. Disconnect the sensor harness connector.
2. Inspect the camshaft position sensor for damage, replace as necessary.