1

Back Up Lamp Screw (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
1.5 N·m (13 lb in)

2

Back Up Lamp Assembly

Tip
Disconnect the electrical connector.

Preliminary Procedure

Remove the rear compartment lid inner panel trim. Refer to Rear Compartment Lid Inner Panel Trim Replacement .

1

Back Up Lamp Nut (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
1.5 N·m (13 lb in)

2

Back Up Lamp Assembly

Procedure

1. Disconnect the electrical connector from the lamp socket.
2. Disengage the two lamp clips from the lamp pocket.
3. Push the lamp assembly outward, away from the rear compartment lid.
4. Replace or transfer the lamp socket and bulb as needed.