GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 326796  Size: SH
  1. Loosen the set screw in the base of the mirror.
  2. Disconnect the electrical connector from the mirror, if equipped.
  3. Remove the mirror from the mounting pad.

Installation Procedure


    Object Number: 326796  Size: SH
  1. Install the mirror to the mounting pad.
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Tighten the mirror set screw.
  4. Tighten
    Tighten the set screw to 2 N·m (18 lb in).

  5. Connect the electrical connector to the mirror, if equipped.