GM Service Manual Online
For 1990-2009 cars only

Object Number: 2018015  Size: SF

Callout

Component Name

Preliminary Procedure

Remove the headlamp assembly. Refer to Headlamp Replacement.

1

Headlamp Bracket Bolt (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
9 N·m (80 lb in)

2

Headlamp Bracket

Procedure

  1. Pull the bracket from the backside of the headlamp assembly.
  2. Inspect the two j-clips, replace if damaged.
  3. Upon installation of the bracket to the headlamp, the lower edge of the bracket must engage to the two clips on the bottomside of the headlamp prior to bolt installation.