Windshield Washer Solvent Container Replacement. Chevrolet Cobalt 2008

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2008 🢒 Cobalt 🢒 Body Systems 🢒 Wipers and Washers 🢒 Windshield Washer Solvent Container Replacement

Windshield Washer Solvent Container Replacement Chevrolet

Callout	Component Name
Preliminary Procedure Disconnect the washer hose clip at the right front fender flange. Disconnect the washer pump hose from the windshield washer hose at the right front fender flange. Remove the right front fender liner. Refer to Front Fender Liner Replacement . Disconnect the electrical connector from the windshield washer pump.
1	Windshield Washer Solvent Container Nut (Qty: 3) Notice: Refer to Fastener Notice in the Preface section. Tighten 10 N·m (89 lb in)
2	Windshield Washer Solvent Container Assembly Procedure Lower and remove the windshield washer solvent container from the right front engine rail and access hole. Open the container cap and pour the windshield washer solvent into a suitable clean container. Remove the windshield washer pump hose from the retention clips on the washer container. Remove the windshield washer pump, and transfer. Remove the windshield washer container cap, and transfer.

Callout

Component Name

Disconnect the washer hose clip at the right front fender flange.
Disconnect the washer pump hose from the windshield washer hose at the right front fender flange.
Remove the right front fender liner. Refer to Front Fender Liner Replacement .
Disconnect the electrical connector from the windshield washer pump.

Windshield Washer Solvent Container Nut (Qty: 3)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
10 N·m (89 lb in)

Windshield Washer Solvent Container Assembly

Lower and remove the windshield washer solvent container from the right front engine rail and access hole.
Open the container cap and pour the windshield washer solvent into a suitable clean container.
Remove the windshield washer pump hose from the retention clips on the washer container.
Remove the windshield washer pump, and transfer.
Remove the windshield washer container cap, and transfer.

Callout	Component Name
Preliminary Procedure Disconnect the washer hose clip at the left front fender flange. Disconnect the washer pump hose from the windshield washer hose at the left front fender flange. Remove the left front fender liner. Refer to Front Fender Liner Replacement . Disconnect the electrical connector from the windshield washer pump.
1	Windshield Washer Solvent Container Nut (Qty: 3) Notice: Refer to Fastener Notice in the Preface section. Tighten 10 N·m (89 lb in)
2	Windshield Washer Solvent Container Assembly Procedure Lower and remove the windshield washer solvent container from the left front engine rail. Open the container cap and pour the windshield washer solvent into a suitable clean container. Remove the windshield washer pump hose from the retention clips on the washer container. Using two flat-bladed tools, remove the windshield washer pump, grommet and transfer. Remove the windshield washer container cap, and transfer.