Preliminary Procedure

1. Remove the instrument panel compartment. Refer to Instrument Panel Compartment Replacement .
2. Remove the radio. Refer to Radio Replacement .
3. Remove the instrument panel outer trim cover. Refer to Instrument Panel Outer Trim Cover Replacement .

1

Radio Antenna Extension Cable Assembly

Procedure

1. Disconnect the electrical connectors at each end of the radio antenna extension cable.
2. If the antenna extension cable is taped into the wiring harness then cut the ends off the old antenna and route the new antenna threw the access holes on either side of the I/P compartment. Secure the antenna cable using tie straps.