Table 1: | Radio Scan Tool Data Parameters |
Table 2: | Radio Scan Tool Output Controls |
Parameter | System State | Expected Value | Description |
---|---|---|---|
Operating Conditions: Ignition ON | |||
Antenna Module | -- | Enabled | The scan tool displays Enabled or Disabled. This is the state of the antenna module. |
Battery Voltage Signal | -- | Varies | This displays Volts. This is the current battery voltage signal. |
Theft Armed | -- | Learned VIN | The scan tool displays Learned VIN or No VIN. Learned VIN is displayed if the radio has the VIN stored in memory. |
Theft Lock Status | -- | Inactive | The scan tool displays Active or Inactive. This is the status of the theft lock. |
Output Control | Description |
---|---|
Antenna | This output control is used to command the antenna. |
Left Front Speaker | Commanding the speaker ON will turn OFF all speakers except this speaker. Commanding the speaker OFF will turn OFF all speakers. |
Left Rear Speaker | Commanding the speaker ON will turn OFF all speakers except this speaker. Commanding the speaker OFF will turn OFF all speakers. |
Radio Setup | This output control is used to setup the radio. |
Right Front Speaker | Commanding the speaker ON will turn OFF all speakers except this speaker. Commanding the speaker OFF will turn OFF all speakers. |
Right Rear Speaker | Commanding the speaker ON will turn OFF all speakers except this speaker. Commanding the speaker OFF will turn OFF all speakers. |
Table 1: | Radio Scan Tool Data Parameters |
Table 2: | Radio Scan Tool Output Controls |
Parameter | System State | Expected Value | Description |
---|---|---|---|
Operating Conditions: Ignition ON, Radio OFF | |||
Antenna Module | -- | Enabled | The scan tool displays Enabled or Disabled. This is the state of the antenna module. |
Auto Volume Control | -- | Off | The scan tool displays On or Off. This is the state of the automatic volume control. |
Band Status | -- | Varies | The scan tool displays FM1, FM2, AM, XM1 or XM2. This is the current band status. |
Battery Voltage Signal | -- | Varies | This displays Volts. This is the current battery voltage signal. |
Cassette Deck H.W. Level | -- | Varies | This displays a numeric value. |
Cassette Deck H.W. Level | -- | Varies | This displays a numeric value. |
Cassette Inserted | -- | Varies | The scan tool displays Yes or No. Yes is displayed if a cassette is in the radio. |
Cassette Tape Side | -- | Varies | The scan tool displays Top or Bottom. This is the current side the cassete tape is playing. |
CD Changer H.W. Level | -- | Varies | This displays a numeric value. |
CD Changer S.W. Level | -- | Varies | This displays a numeric value. |
CD Inserted | -- | Varies | The scan tool displays Yes or No. Yes is displayed if a CD is inserted. |
CD Selected - ICDX | -- | Varies | The scan tool displays Disc 1-6 or None. |
DRR | -- | Present | The scan tool displays Present or Not Present. This is the status of the digital radio receiver (DRR). |
ICDX | -- | Varies | The scan tool displays Present or Not Present. |
Ign. Cycles Since last DTC | -- | Varies | This displays a numeric value. This is the number of ignition cycles since the last DTC was set. |
Metal Tape Cassette | -- | Varies | The scan tool displays Yes or No. Yes is displayed if a metal tape cassette is inside the radio. |
Personalization Status | -- | Varies | The scan tool displays Driver 1, Driver 2 or Unknown. This is the current personalization state. |
Phone Signal | -- | Present | The scan tool displays Present or Not Present. This is the state of the phone signal. |
Preset Status | -- | Varies | The scan tool displays Preset 1-6 or Not A Preset. |
Radio Signal Strength | -- | Varies | This displays dB. This is the current radio signal strength measured in decibels. |
RSE | -- | Varies | The scan tool displays Present or Not Present. Present is displayed if rear seat entertainment (RSE) is available. |
Source Status | -- | Off | The scan tool displays Off, Tuner, Cassette, CD, ICDX, DVD or DRR Tuner. This is the current radio source state. |
Theft Armed | -- | Learned VIN | The scan tool displays Learned VIN or No VIN. Learned VIN is displayed if the radio has the VIN stored in memory. |
Theft Lock Status | -- | Inactive | The scan tool displays Active or Inactive. This is the current state of the theft lock. |
Total Cassette Hours | -- | Varies | This displays Hrs. This is the total cassette hours. |
Total CD Hours | -- | Varies | This displays Hrs. This is the total CD hours. |
Total Radio Hours | -- | Varies | This displays Hrs. This is the total radio hours. |
Volume Control | -- | Varies | This displays Counts. This is the current volume measured in counts. |
Output Control | Description |
---|---|
Antenna | This output control is used to command the antenna. |
Left Front Speaker | Commanding the speaker ON will turn OFF all speakers except this speaker. Commanding the speaker OFF will turn OFF all speakers. |
Left Rear Speaker | Commanding the speaker ON will turn OFF all speakers except this speaker. Commanding the speaker OFF will turn OFF all speakers. |
Right Front Speaker | Commanding the speaker ON will turn OFF all speakers except this speaker. Commanding the speaker OFF will turn OFF all speakers. |
Right Rear Speaker | Commanding the speaker ON will turn OFF all speakers except this speaker. Commanding the speaker OFF will turn OFF all speakers. |
VIN Relearn | This output control is used to program the vehicle identification number (VIN) into the radio. |