GM Service Manual Online
For 1990-2009 cars only

Object Number: 1538064  Size: LF

Callout

Component Name

Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

  1. Remove the front seat. Refer to Front Seat Replacement - Bucket .
  2. Remove the seat cushion inner trim cover. Refer to Seat Cushion Inner Trim Panel Replacement .
  3. Remove the seat cushion outer trim cover. Refer to Front Seat Cushion Outer Trim Panel Replacement .
  4. Remove the front seat cushion cover and pad. Refer to Front Seat Cushion Cover and Pad Replacement .
  5. Re-zero the inflatable restraint passenger presence system whenever the seat cushion or any component of the passenger presence system is removed. Refer to Passenger Presence System Programming and Setup .

1

Screw, Seat Cushion Assembly (Qty: 4)

Tighten
25 N·m (18 lb ft)

2

Frame Assembly, Seat Cushion

Tip

    • Remove the lumbar adjuster screws.
    • Disconnect the cushion heater electrical connector.