GM Service Manual Online
For 1990-2009 cars only

Tools Required

J 44551 Suction Screen Kit

Important: Suction screens are intended to be installed in the suction hose after a major compressor failure.

The suction screens are available in 3 different sizes.


    Object Number: 812268  Size: SH
  1. Insert the J 44551-6 Sizing Tool (1) into the suction hose to select the correct size suction screen.
  2. Insert the suction screen into the compressor end of the suction hose.

  3. Object Number: 812269  Size: SH
  4. Install the correct mandrel (1) to the J 44551-5 Screen Installation Tool.

  5. Object Number: 812270  Size: SH
  6. Install the J 44551-5 (3) over the end of the suction hose and the suction screen (2).
  7. Important: Correct placement of the J 44551-5 is critical.

  8. Tighten the forcing screw of the J 44551-5 .
  9. The suction screen is fully installed when the screen is flush with the end of the suction hose fitting.

  10. Remove the J 44551-5 from the suction hose.
  11. Install the J 44551-1 Suction Screen Notification Label.