Preliminary Procedures

Disable the SIR in Zones 2 or 6. Refer to SIR Disabling and Enabling .

1

Seat Belt Anchor Bolt

Notice: Refer to Fastener Notice in the Preface section.

Tip
Move the seat to the full forward position to gain access to the bolt.

Tighten
45 N·m (33 lb ft)

2

Seat Belt Adjuster Cover

3

Seat Belt Adjuster Bolt

Tighten
45 N·m (33 lb ft)

4

Seat Belt Retractor Bolt

Tip
Remove the center pillar lower trim panel to gain access to the bolt. Refer to Center Pillar Lower Garnish Molding Replacement .

Tighten
45 N·m (33 lb ft)

5

Front Seat Belt Retractor Assembly

Tip
Disconnect the belt tension sensor electrical connector.