Application
| Specification
|
Metric
| English
|
Front Brakes J41/JM4
|
- Brake Pad Lining Minimum Thickness
| 1.0 mm
| 0.039 in
|
- Brake Pad Lining Thickness - New
| 12.0 mm
| 0.472 in
|
- Brake Rotor Diameter, 4 Stud J41/JM4
| 256.00 mm
| 10.079 in
|
- Brake Rotor Diameter, 5 Stud JM4
| 280.00 mm
| 11.024 in
|
- Brake Rotor Discard Thickness*
| 22.0 mm
| 0.87 in
|
- Brake Rotor Maximum Allowable Assembled Lateral Runout
| 0.06 mm
| 0.002 in
|
- Brake Rotor Maximum Allowable Scoring
| 1.50 mm
| 0.059 in
|
- Brake Rotor Maximum Allowable Thickness Variation
| 0.025 mm
| 0.001 in
|
- Brake Rotor Minimum Allowable Thickness After Refinish
| 22.75 mm
| 0.896 in
|
- Brake Rotor Thickness - New
| 23.69 mm
| 0.933 in
|
Front Brakes JL9 (With LNF)
|
|
| 315.5 mm
| 12.421 in
|
- Brake Rotor Discard Thickness*
| 24.0 mm
| 0.945 in
|
- Brake Rotor Maximum Allowable Assembled Lateral Runout
| 0.06 mm
| 0.002 in
|
- Brake Rotor Maximum Allowable Scoring
| 1.50 mm
| 0.059 in
|
- Brake Rotor Maximum Allowable Thickness Variation
| 0.025 mm
| 0.001 in
|
- Brake Rotor Minimum Allowable Thickness After Refinish
| 24.2 mm
| 0.952 in
|
- Brake Rotor Thickness - New
| 26.0 mm
| 1.023 in
|
Front Brakes JL9 (Without LNF)
|
|
| 296.00 mm
| 11.653 in
|
- Brake Rotor Discard Thickness*
| 22.8 mm
| 0.898 in
|
- Brake Rotor Maximum Allowable Assembled Lateral Runout
| 0.06 mm
| 0.002 in
|
- Brake Rotor Maximum Allowable Scoring
| 1.50 mm
| 0.059 in
|
- Brake Rotor Maximum Allowable Thickness Variation
| 0.025 mm
| 0.001 in
|
- Brake Rotor Minimum Allowable Thickness After Refinish
| 23.0 mm
| 0.906 in
|
- Brake Rotor Thickness - New
| 26.0 mm
| 1.023 in
|
Rear Brakes JL9 (With LNF)
|
|
| 292.0 mm
| 11.496 in
|
- Brake Rotor Discard Thickness*
| 18.0 mm
| 0.709 in
|
- Brake Rotor Maximum Allowable Assembled Lateral Runout
| 0.06 mm
| 0.002 in
|
- Brake Rotor Maximum Allowable Scoring
| 1.50 mm
| 0.059 in
|
- Brake Rotor Maximum Allowable Thickness Variation
| 0.025 mm
| 0.001 in
|
- Brake Rotor Minimum Allowable Thickness After Refinish
| 18.2 mm
| 0.717 in
|
- Brake Rotor Thickness - New
| 19.9 mm
| 0.783 in
|
Rear Brakes JL9 (Without LNF)
|
|
| 270.0 mm
| 10.630 in
|
- Brake Rotor Discard Thickness*
| 11.8 mm
| 0.465 in
|
- Brake Rotor Maximum Allowable Assembled Lateral Runout
| 0.06 mm
| 0.002 in
|
- Brake Rotor Maximum Allowable Scoring
| 1.50 mm
| 0.059 in
|
- Brake Rotor Maximum Allowable Thickness Variation
| 0.025 mm
| 0.001 in
|
- Brake Rotor Minimum Allowable Thickness After Refinish
| 12.0 mm
| 0.472 in
|
- Brake Rotor Thickness - New
| 14.0 mm
| 0.551 in
|
* All brake rotors have a discard dimension cast into them. Replace any rotor that does not meet this specification. After refinishing the rotor, replace any rotor that does not meet the minimum thickness specification.
|
