Outside Rear View Mirror (OSRV) Difficult to Adjust, Will Not Move Through Full Range of Adjustment (Check for Proper Engagement of Mirror Body to Adjustment Tower)

Some customers may comment on the manual outside rear view mirror being difficult to adjust or will not move through the full range of adjustment.

This condition may be due to the rear view mirror being improperly positioned in the mirror tower, causing the toggle to be restricted by the upper door trim cover.

Technicians are to check for proper engagement of the mirror body to the adjustment tower using the procedure below.

1. Remove the upper door trim cover.
2. Loosen the mirror and properly engage the tower legs into the adjustment tower. Verify that the tower legs are seated by physically pulling the tower up/down and/or side to side. The tower leg will "click" if not seated correctly.
3. If the tower is still not seated, remove all three fasteners and the mirror, the reinstall the mirror.

For vehicles repaired under warranty, use: