GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Cobalt 🢒 Engine 🢒 Engine Mechanical - 2.0L 🢒 Engine Mount Bracket Replacement

Removal Procedure
  1. Remove the engine mount. Refer to Engine Mount Replacement.

    2. Object Number: 851554 Size: SH
  2. Remove the intermediate bracket to engine bolts.
  3. Remove the intermediate bracket from the engine.

Installation Procedure

    Object Number: 851554 Size: SH
  1. Install the intermediate bracket to the engine.
  2. Hand tighten the engine mount intermediate bracket bolts in the following locations:
    3. • The long bolts in the forward and front lower holes
    • The short bolt in the rear upper hole

    Caution: Refer to Fastener Caution in the Preface section.

  3. Tighten the intermediate bracket bolts to 100 N·m (74 lb ft).
  4. Install the engine mount. Refer to Engine Mount Replacement.