For 1990-2009 cars only
Removal Procedure
- Remove the battery to battery tray negative battery cable. Refer to Battery Negative Cable Replacement.
- Remove the tape securing the battery current sensor to the negative battery cable.
- Modify the eyelet end in order to remove the battery current sensor from the negative battery cable. Do not remove the alignment tab.
Installation Procedure
- Install the battery current sensor by passing the ground end of the negative battery cable through the sensor.
- Wrap electrical tape around the battery current sensor in order to secure the battery current sensor to the negative battery cable.
- Return the cable eyelet to its original configuration.
- Install the battery to battery tray negative battery cable. Refer to Battery Negative Cable Replacement.
Note: Ensure the battery current sensor is installed in the correct direction and location on the negative battery cable.
